Three-in-one Dehumidifying Dryer
-
Stable supply of dehumidified air with dew point below - 40℃.
-
PID temperature controlling system low power consumption, high efficiency.
-
Using no-contacting solid state relay control heating(distribution).
- All stainless steel feeding system.
-
Closed circle back dehumidification system.
-
Raw material supply of 3 sets of standard configuration and up to 6 injection molding machines.
-
Simple operation layout could understand the condition of machine running clearly.
-
Intelligent Fault alarm and could make an appointment time multiple protection devices.
- Optional dew point meter to monitor the dew point at any time.
- Stable supply of dehumidified air with dew point below - 40℃.
- PID temperature controlling system low power consumption, high efficiency.
- Using no-contacting solid state relay control heating(distribution).
- All stainless steel feeding system.
- Closed circle back dehumidification system.
- Raw material supply of 3 sets of standard configuration and up to 6 injection molding machines.
- Simple operation layout could understand the condition of machine running clearly.
- Intelligent Fault alarm and could make an appointment time multiple protection devices.
- Optional dew point meter to monitor the dew point at any time.
Honeycomb Type Three-in-one Dehumidifying Dryer (Closed)
TCD Series compact dryer mounted on a mobile frame, in addition to the dehumidifying air dryer and drying hopper, the unit also includes a three-phase loader.
This new version compact offers more features as standard equipment with a smaller footprint than comparable systems, giving you maximum performance in
minimal space. The TCD drying hopper is designed to create mass flow with no short pass. It is equipped with a programmable loader, which releases measured
amounts of resin at specific intervals. Pellets are conveyed using warm, dry air and delivered for the next loading cycle on a just-in-time schedule. This keeps pellets
at the optimum moisture level from the dryer to molding machine, maximizing performance and minimizing part defects.
Features:
Specifications:
| Model |
TCD-525 |
TCD-550 |
TCD-575 |
TCD-10100 |
TCD-15150 |
TCD-20200 |
TCD-30300 |
|
|
Holding capacity |
Kg/L |
25/40 |
50/80 |
75/120 |
100/160 |
150/230 |
200/300 |
300/450 |
|
Dew point |
℃ |
-40 |
||||||
|
Dehumidification volume |
M3/hr |
50 |
50 |
50 |
100 |
150 |
200 |
300 |
|
Temperature Range |
℃ |
150 |
||||||
|
Dry heating power |
KW |
3 |
4 |
5 |
6 |
8 |
10 |
12 |
|
Dry fan power |
KW |
0.55 |
0.55 |
0.55 |
0.75 |
1.1 |
1.5 |
2.2 |
|
Regenerative electric power |
KW |
3 |
3 |
4 |
4 |
5 |
6 |
8 |
|
Regenerative fan power |
KW |
0.18 |
0.18 |
0.18 |
0.18 |
0.18 |
0.4 |
0.4 |
|
Desiccant |
|
Honeycomb Rotor |
||||||
|
Feed fan power |
KW |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
1.5 |
|
Suction machine piping |
lnch |
1.5 |
1.5 |
1.5 |
1.5 |
1.5 |
1.5 |
2.0 |
|
Dimensions L*W*H |
CM |
115*75*164 |
115*75*164 |
115*75*186 |
133*96*198 |
135*98*198 |
138*98*208 |
162*108*205 |
|
Weight |
KG |
240 |
260 |
280 |
320 |
400 |
460 |
520 |
Environment-friendly Three-in-one Dehumidifying Dryer
Features:
Specifications:
|
Model |
TSF-50 |
TSF-75 |
TSF-100 |
TSF-150 |
TSF-200 |
|
|
Holding capacity |
Kg/L |
50/80 |
75/120 |
100/160 |
150/230 |
200/300 |
|
Dry heating power |
KW |
4 |
5 |
6 |
8 |
10 |
|
Dry fan power |
KW |
0.37 |
0.37 |
0.55 |
0.75 |
1.1 |
|
Feed fan power |
KW |
1.1 |
1.1 |
1.5 |
1.5 |
1.5 |
|
Drying capability |
Kg/Hr |
17.0 |
25.0 |
36.0 |
48.0 |
60.0 |
|
Compressor power |
KW |
2.2 |
2.2 |
3.7 |
3.7 |
5.5 |
|
Air Flow |
L/min |
190 |
190 |
300 |
420 |
520 |
|
Suction machine piping |
Inch |
1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
|
Dimensions L*W*H |
CM |
98*75*200 |
98*75*210 |
110*75*210 |
110*75*210 |
130*100*210 |
|
Weight |
KG | 280 | 280 | 350 | 350 | 460 |
